1.      Remove and save shipping plugs. Insert 35-foot tubing into OUT-let side. Repeat insertion check.

NOTE: Incorrect connection will cause rapid depletion.

2.      Insert 3-foot tubing into John Guest® fitting on IN-let side of tank.

3.      Slightly pull tubing to check for proper insertion.

4.      Loosen air relief cap on top of tank 2 full turns with T-wrench (provided)

5.      Partially open water supply and watch for a small amount of water to appear around the air relief cap.

NOTE: This process may take 2-3 minutes.

6.      Turn water supply off.

7.      Hand tighten air relief cap, plus ¼ turn with a T-wrench.

8.      Turn water supply back on and squeeze spray wand until air is purged and water flows smoothly. Enjoy a spot free rinse with every use!